Autel
Autel CSC0802-13 Corner Laser | US Version
US Version | North American Market
- Application: Battery-powered corner laser for positioning an applicable reflector during radar calibration setup.
- Included: CSC0802-13 corner laser, part number 802-13. Stand and reflector sold separately.
- Warranty: One-year limited warranty.
Confirm your calibration setup before ordering.
Email
support@autel-us.com
with the vehicle’s year, make, model, required calibration
and your existing equipment model numbers.
Suggested accessories—select only what your calibration procedure requires. Already own a component? Uncheck it before adding to cart.
Autel CSC0802-13 Corner Laser — US Version
The Autel CSC0802-13 Corner Laser (part number 802-13) is a battery-powered laser emitter used in radar calibration setups. It attaches between a corner reflector stand and an applicable corner reflector to assist with positioning during the calibration process. This listing is for the North American-market US Version laser accessory.
- Dedicated corner laser: A laser emitter for applicable Autel corner reflector setups, rather than a radar reflector or complete calibration system.
- Battery-powered operation: Provides a battery-powered laser for use during the required setup and positioning procedure.
- Works within a supporting setup: Mounts between the corner reflector stand and an applicable reflector. The stand and reflector are sold separately.
- Procedure-specific selection: Confirm the required laser, reflector and supporting equipment against the vehicle’s calibration instructions. Required equipment varies by vehicle and calibration task.
- Limited warranty: Covered by a one-year limited warranty.
Check your existing calibration equipment before ordering.
Email support@autel-us.com with the vehicle’s year, make and model, the required calibration, and the model numbers of your existing stand, reflector and Autel calibration system. We can help check whether CSC0802-13 is the accessory your setup requires.
Battery-Powered Corner Laser for Radar Calibration Setups
The Autel CSC0802-13 is a dedicated laser emitter used with applicable corner reflector equipment during radar calibration. This US Version accessory is identified by part number 802-13.
- Laser positioning accessory: Assists with positioning an applicable corner reflector as part of the required calibration setup.
- Battery-powered design: Uses battery power to operate the laser emitter.
- One-year limited warranty: Covered by Autel’s one-year limited warranty.
Fits Between the Stand and an Applicable Corner Reflector
Autel’s accessory catalog identifies CSC0802-13 as a laser emitter that attaches between the corner reflector stand and applicable corner reflectors of different sizes.
- Check the complete setup: Confirm the required stand, laser and reflector against the vehicle’s calibration procedure.
- Select the reflector separately: The laser does not replace the vehicle-specific radar calibration reflector.
- Keep the package scope clear: This listing is for the corner laser accessory. The stand and reflector are sold separately.
Any stand or reflector shown in a setup illustration is supporting equipment and is not included with this laser listing.
Confirm the Accessory Your Calibration Procedure Requires
A corner laser, reflector and stand perform different roles. Choosing the correct combination starts with the vehicle’s calibration instructions and the equipment already available in your workshop.
- Identify your existing equipment: Check the model numbers of your stand, reflector and Autel calibration system before adding accessories.
- Follow the specified procedure: Required equipment and positioning vary by vehicle and calibration task.
- Verify before purchasing: Do not assume that adding this laser alone completes a radar calibration setup.
Need help checking your setup? Email support@autel-us.com before ordering. Include the vehicle’s year, make, model, required calibration and your existing equipment model numbers.
Application & Compatibility
Product Identity & Intended Use
The Autel CSC0802-13 Corner Laser (part number 802-13) is a battery-powered laser emitter used in radar calibration setups. It attaches between a corner reflector stand and an applicable corner reflector.
This listing is for the US Version accessory supplied for the North American market.
Match the Laser to the Required Setup
Select CSC0802-13 according to the vehicle’s calibration procedure and the supporting equipment required for that procedure. Do not assume compatibility based only on vehicle brand or the appearance of a reflector.
- Confirm the vehicle’s year, make, model and required radar calibration.
- Check the specified laser, stand and reflector references in the calibration instructions.
- Verify the model numbers of your existing equipment before ordering additional accessories.
Laser, Stand & Reflector Have Different Roles
CSC0802-13 is the laser emitter. CSC0800 is the separately sold corner reflector stand assembly. Vehicle-specific reflectors, such as CSC0802-10 and CSC0802-11, are separate accessories.
The required combination must match the calibration procedure. Purchasing the laser alone does not provide a complete radar calibration system.
Check Battery Requirements Before Use
Autel identifies CSC0802-13 as battery-powered. Battery type, quantity and whether batteries are supplied are not specified in the official product information used for this listing.
Confirm these details before purchasing batteries separately, and follow the instructions supplied with the accessory.
Confirm compatibility before ordering.
Email support@autel-us.com with the vehicle’s year, make, model, required calibration, and the model numbers of your existing Autel tablet, calibration system, stand and reflector. We can help check which accessories your setup requires.
|
Autel All Systems ADAS Brochure Official Autel North America ADAS system and accessory catalog, including the CSC0802-13 battery-powered corner laser (part number 802-13). |
Download |
What’s Included
| Item | Part Number |
|---|---|
| Autel CSC0802-13 Corner Laser — US Version | 802-13 |
Stand and reflector sold separately. This listing is for the CSC0802-13 corner laser accessory. It does not include the CSC0800 stand assembly or a corner reflector.
Supporting equipment shown in application or setup images is for illustration and is not included with this listing.
Check your package requirements before ordering. Email support@autel-us.com with your existing equipment model numbers and required calibration. Please also contact us if you need confirmation of the battery requirements or whether batteries are supplied.
Compare the Corner Laser, Stand & Reflectors
These accessories perform different roles within a radar calibration setup. Select the equipment specified by the vehicle’s calibration procedure. All items below are sold separately.
Swipe horizontally to compare all four items.
| Selection Guide | CSC0802-13 Corner Laser | CSC0800 Corner Reflector Stand Assembly | CSC0802-10 Toyota, Honda & Subaru Corner Reflector | CSC0802-11 Hyundai & Mazda Corner Reflector |
|---|---|---|---|---|
| Part Number | 802-13 | 800 | 802-10 | 802-11 |
| Primary Role | Battery-powered laser emitter used during corner reflector setup and positioning | Supports an applicable corner reflector setup | OE-sized reflector for specified vehicle radar calibration procedures | OE-sized reflector for specified vehicle radar calibration procedures |
| Official Application | Attaches between the corner reflector stand and an applicable corner reflector | For use with Autel corner reflectors and the laser emitter in applicable setups | Supported Toyota, Honda and Subaru radar calibration applications, including BSM | Supported Hyundai and Mazda radar calibration applications, including BSM, ACC and FCW |
| When to Select | When the required setup specifies this laser and you do not already have it | When the required setup specifies this stand and you do not already have it | When the vehicle’s calibration procedure specifies CSC0802-10 | When the vehicle’s calibration procedure specifies CSC0802-11 |
| Package Boundary | Corner laser accessory. Stand and reflector sold separately. | Includes stand, stand base and attachment handle. Reflector and laser not included. | Reflector only. Stand and laser sold separately. | Reflector only. Stand and laser sold separately. |
| Version Offered | US Version / North American Market | US Version / North American Market | US Version / North American Market | US Version / North American Market |
| Limited Warranty | 1 year | 1 year | 1 year | 1 year |
Check the required equipment combination. The laser, stand and reflector are separate accessories. This comparison explains their roles; it does not establish that every combination is suitable for every vehicle or calibration procedure.
CSC0802-10 and CSC0802-11 have different listed vehicle applications. BSM, ACC and FCW availability varies by vehicle and procedure.
Email support@autel-us.com before ordering. Include the vehicle’s year, make, model, required calibration and your existing equipment model numbers so we can help check which accessories are required.
Autel CSC0802-13 US Version: Frequently Asked Questions
Check the corner laser’s role, supporting equipment and setup requirements before ordering.
Q1: What is the Autel CSC0802-13 corner laser used for?
The Autel CSC0802-13, part number 802-13, is a battery-powered laser emitter used during radar calibration setup. It attaches between a corner reflector stand and an applicable corner reflector to assist with positioning.
It is a setup accessory. It does not replace the radar calibration reflector or provide a complete calibration system on its own.
Q2: Does CSC0802-13 include the stand and corner reflector?
No. This listing is for the CSC0802-13 corner laser. The CSC0800 stand assembly and the applicable corner reflector are sold separately.
Before buying additional equipment, email support@autel-us.com with the model numbers of your existing accessories and the required calibration. We can help check which items your setup requires.
Q3: Will CSC0802-13 work with my existing Autel calibration equipment?
Compatibility depends on the required calibration procedure and the stand and reflector used in that setup. The Autel name on your equipment alone is not enough to confirm compatibility.
Please contact support@autel-us.com before purchasing. Include the vehicle’s year, make, model, required calibration, and the model numbers of your Autel tablet, calibration system, stand and reflector.
Q4: Do I need this corner laser for every radar calibration?
Do not assume that every radar calibration requires CSC0802-13. Required targets, accessories and positioning methods vary by vehicle and calibration procedure. Follow the applicable instructions to determine whether this laser is required.
If the equipment reference is unclear, email support@autel-us.com before ordering. Include the vehicle details and, if available, the equipment reference shown in your calibration instructions.
Q5: What batteries does CSC0802-13 use, and are they included?
Autel identifies CSC0802-13 as battery-powered. The official product information used for this listing does not specify the battery type, quantity or whether batteries are included.
Please email support@autel-us.com to confirm these details before purchasing batteries separately. Follow the battery instructions supplied with the accessory.
Q6: Is this the US Version, and what warranty is provided?
This listing is for the CSC0802-13 supplied for the North American market, identified on our store as the US Version. Autel lists a one-year limited warranty for this accessory.
For warranty assistance, email support@autel-us.com with your order number and a description of the issue.
