Autel
Autel CSC0802-11 Corner Reflector | US Version
US Version | North American Market
- Application: OE-sized corner reflector for radar calibration on supported Hyundai and Mazda vehicles, including BSM, ACC and FCW applications.
- Included: One CSC0802-11 corner reflector, part number 802-11. CSC0800 stand and CSC0802-13 laser sold separately.
- Warranty: One-year limited warranty.
Confirm your calibration setup before ordering.
Email
support@autel-us.com
with the vehicle year, make, model, required calibration
and your existing Autel equipment model numbers.
Requirements vary by vehicle and procedure.
Suggested accessories—select only what your calibration procedure requires. Already own a component? Uncheck it before adding to cart.
Autel CSC0802-11 Corner Reflector — US Version
The Autel CSC0802-11 (part number 802-11) is an OE-sized corner reflector for radar calibration on supported Hyundai and Mazda vehicles, including Blind Spot Monitoring (BSM), Adaptive Cruise Control (ACC) and Front Collision Warning (FCW) applications. This listing is for the North American US Version.
- OE-sized corner reflector: For vehicle calibration procedures that specify CSC0802-11.
- Application: Hyundai and Mazda radar calibration, including BSM, ACC and FCW. Confirm the required reflector for the specific vehicle and procedure.
- Related equipment: The CSC0800 stand and CSC0802-13 corner laser are separate products and are not included.
- Warranty: Covered by a one-year limited warranty.
Confirm compatibility before purchase: Email support@autel-us.com with the vehicle year, make, model, required calibration and your existing Autel tablet, software and calibration equipment. We can help check the required configuration before you order.
Autel CSC0802-11 US Version — Radar Calibration Accessory
OE-Sized Corner Reflector for Supported Calibration Procedures
The Autel CSC0802-11 is an OE-sized corner reflector for radar calibration on supported Hyundai and Mazda vehicles, including Blind Spot Monitoring (BSM), Adaptive Cruise Control (ACC) and Front Collision Warning (FCW) applications. The North American part number is 802-11.
- Product identity: CSC0802-11 corner reflector, supplied as the US Version.
- Purpose: A calibration accessory for procedures that specify this reflector.
- Warranty: Covered by a one-year limited warranty.
Choose by Vehicle and Calibration Procedure
Autel identifies the CSC0802-11 for Hyundai and Mazda radar calibration applications. Confirm the specified reflector for the vehicle and system being serviced before ordering.
The CSC0802-10 is a different reflector identified for Toyota, Honda and Subaru applications. Similar appearance does not establish that the two models are interchangeable.
Send the vehicle year, make, model and required calibration to support@autel-us.com so we can help check the application before purchase.
Check Your Existing Equipment Before Adding Accessories
The reflector, stand and corner laser are separate products in Autel's OE-sized corner reflector accessory range. This listing is for the CSC0802-11 reflector.
- CSC0800 stand: Includes the stand, base and attachment handle. Sold separately.
- CSC0802-13 corner laser: A battery-powered laser emitter that attaches between the stand and an applicable corner reflector. Sold separately.
These accessories alone do not define a complete calibration setup. Required diagnostic equipment, software, positioning tools and preparation depend on the vehicle and procedure.
Before ordering, email support@autel-us.com with your existing Autel tablet, software and calibration equipment so we can help check what you need.
CSC0802-11 Application & Compatibility
Which Calibration Jobs Is This Reflector For?
The Autel CSC0802-11, part number 802-11, is an OE-sized corner reflector for radar calibration on supported Hyundai and Mazda vehicles. Autel lists applications including Blind Spot Monitoring (BSM), Adaptive Cruise Control (ACC) and Front Collision Warning (FCW). This listing is for the North American US Version.
When selecting a Hyundai radar calibration reflector or a Mazda blind spot calibration target, check the accessory specified for the exact vehicle and procedure. The published applications do not mean that every Hyundai or Mazda model uses this reflector for all three systems.
Confirm the Radar System and Required Target
Identify the system being calibrated before choosing the reflector. Check the applicable vehicle service information and your Autel calibration instructions for the required accessory reference and setup.
- Vehicle: Confirm the year, make and model.
- Calibration task: Specify whether you need BSM, ACC, FCW or another radar calibration procedure.
- Required accessory: Verify that the procedure specifies CSC0802-11 or the corresponding Autel reference AUTEL-CSC0802/11.
- Existing equipment: Check your Autel tablet, installed ADAS software and calibration equipment together.
CSC0802-10 is a different reflector listed for Toyota, Honda and Subaru applications. Do not select between CSC0802-10 and CSC0802-11 by appearance or assume they are interchangeable.
Check Your Stand and Laser Before Ordering
The CSC0802-11 corner reflector, CSC0800 stand and CSC0802-13 corner laser are separate products. Purchasing this reflector does not include the stand or laser emitter.
Review your existing equipment against the setup required by the vehicle procedure. Confirm the mounting and positioning configuration before ordering additional accessories. The reflector alone does not provide a complete ADAS calibration system.
Need Help Confirming the Right Configuration?
Before purchasing, email support@autel-us.com with the vehicle year, make, model, required calibration and your existing Autel tablet, software, stand and related equipment model numbers.
If available, include the accessory reference shown in your calibration instructions. We can help check the required reflector and supporting equipment before you order.
|
Autel All Systems ADAS Brochure Official Autel North America system and accessory catalog, including the CSC0802-11 corner reflector for Hyundai and Mazda (part number 802-11). |
Download |
| Included Item | Part Number | Quantity |
|---|---|---|
| Autel CSC0802-11 OE-Sized Corner Reflector — US Version | 802-11 | 1 |
Related Equipment Sold Separately
This listing includes the CSC0802-11 corner reflector. The following related accessories are not included:
- CSC0800: Corner reflector stand assembly.
- CSC0802-13: Corner reflector laser emitter.
Related equipment shown in product illustrations is for reference and is sold separately. Check your existing equipment against the configuration required for the specific Hyundai or Mazda calibration procedure before ordering additional accessories.
Need help checking your setup? Email support@autel-us.com with your equipment model numbers, vehicle details and intended calibration.
Compare Autel Corner Reflectors & Related Accessories
Match the reflector to the vehicle’s calibration procedure, then check which supporting accessories your setup requires. These items are sold separately.
Swipe horizontally to compare all four items.
| Selection Guide | CSC0802-11 Hyundai & Mazda Corner Reflector | CSC0802-10 Toyota, Honda & Subaru Corner Reflector | CSC0800 Corner Reflector Stand Assembly | CSC0802-13 Corner Laser |
|---|---|---|---|---|
| Part Number | 802-11 | 802-10 | 800 | 802-13 |
| Primary Role | OE-sized radar calibration reflector | OE-sized radar calibration reflector | Stand assembly for positioning an applicable corner reflector | Battery-powered laser emitter for positioning an applicable corner reflector |
| Official Application | Supported Hyundai and Mazda radar calibration applications, including BSM, ACC and FCW | Supported Toyota, Honda and Subaru radar calibration applications, including BSM | Supporting equipment for applicable corner reflector setups | Attaches between the stand and an applicable corner reflector |
| When to Select | When the vehicle’s calibration procedure specifies CSC0802-11 | When the vehicle’s calibration procedure specifies CSC0802-10 | When the required setup calls for this stand and you do not already have it | When the required setup calls for this laser and you do not already have it |
| Package Boundary | Reflector only. Stand and corner laser sold separately. | Reflector only. Stand and corner laser sold separately. | Includes stand, stand base and attachment handle. Reflector and laser not included. | Corner laser accessory. Reflector not included. |
| Version Offered | US Version / North American Market | US Version / North American Market | US Version / North American Market | US Version / North American Market |
| Limited Warranty | 1 year | 1 year | 1 year | 1 year |
Confirm the exact reflector before ordering. CSC0802-10 and CSC0802-11 serve different listed vehicle applications. Do not assume they are interchangeable. BSM, ACC and FCW coverage varies by vehicle and procedure; not every listed function applies to every Hyundai or Mazda model.
Email support@autel-us.com before purchasing. Include the vehicle’s year, make, model, required calibration, and your existing Autel tablet and calibration equipment so we can help check the required setup.
Autel CSC0802-11 US Version: Frequently Asked Questions
Check Hyundai and Mazda radar calibration requirements, reflector selection and your existing equipment before ordering.
Q1. Will the CSC0802-11 work for my Hyundai or Mazda radar calibration?
Autel lists the CSC0802-11 for radar calibration on supported Hyundai and Mazda vehicles, including Blind Spot Monitoring (BSM), Adaptive Cruise Control (ACC) and Front Collision Warning (FCW). This does not mean that every model uses this reflector for all three systems.
Before purchasing, email support@autel-us.com with the vehicle year, make, model, required calibration and your existing Autel equipment. If available, include the accessory reference shown in the calibration instructions.
Q2. Can I use one CSC0802-11 reflector for BSM, ACC and FCW calibration?
Autel identifies all three as applications for the CSC0802-11 across supported Hyundai and Mazda vehicles. The required reflector, quantity and positioning must be checked for each specific calibration procedure.
Do not assume that one reflector or one setup covers every radar calibration job. Send the vehicle details and intended procedures to support@autel-us.com before ordering if you need help checking the equipment required.
Q3. Does the CSC0802-11 include the stand and laser?
No. This listing includes one CSC0802-11 corner reflector, part number 802-11. The CSC0800 stand and CSC0802-13 corner laser are sold separately.
Before buying additional accessories, email support@autel-us.com with your existing stand, laser and calibration equipment model numbers. We can help check the configuration required for your intended procedure.
Q4. Can the CSC0802-10 replace the CSC0802-11?
Do not assume they are interchangeable. Autel lists CSC0802-11 for Hyundai and Mazda applications, while CSC0802-10 is listed for Toyota, Honda and Subaru applications.
Select the complete accessory reference specified in the vehicle calibration procedure. Similar appearance alone does not establish that another reflector is suitable.
Q5. Will the CSC0802-11 work with my existing Autel tablet and ADAS equipment?
Your tablet, installed ADAS software, calibration equipment and vehicle procedure need to be checked together. Owning an Autel diagnostic tablet alone does not confirm support for the intended calibration.
Autel's IA700 manual identifies this reflector as AUTEL-CSC0802/11; the North American product page lists CSC0802-11 and part number 802-11. Purchasing the reflector does not include a tablet, software activation or a complete calibration system.
Email support@autel-us.com with your equipment models, software details and intended calibration before purchasing if you need help confirming compatibility.
Q6. What warranty does the CSC0802-11 have?
Autel North America lists the CSC0802-11 with a one-year limited warranty. This listing is for the North American US Version.
For warranty assistance, email support@autel-us.com with your order number and a description of the issue.
