Autel
Autel CSC0605-01 Radar Calibration Box | US Version
CSC0605-01 Radar Calibration Box | US Version
- Application: Powered accessory for supported blind spot radar calibration procedures specifying CSC0605/01.
- System: Requires the appropriate frame, diagnostic tablet and ADAS software; not a complete calibration kit.
- Power: 24 V, 1 A, 24 W. Confirm compatible power equipment and mounting hardware before ordering.
Already have an ADAS setup? Before ordering, email support@autel-us.com with your frame model, tablet model, vehicle details and required calibration so we can help check compatibility and additional equipment.
Autel CSC0605-01 Radar Calibration Box
The Autel CSC0605-01 Radar Calibration Box is a powered accessory used within supported Autel ADAS calibration setups. Identified as AUTEL-CSC0605/01 in Autel's Standard Calibration Frame User Manual, it is documented for Volkswagen blind spot detection system calibration.
- System role: A radar calibration accessory used with the required frame, diagnostic tablet, software and procedure-specific equipment. It is not a standalone diagnostic tool or complete ADAS calibration system.
- Frame mounting: The Standard Calibration Frame manual describes attaching the box to the sliding plate on the frame crossbar. Confirm the required mounting hardware for your exact frame configuration.
- Powered operation: Official specifications list 24 V, 1 A and 24 W. Confirm the correct power equipment before use.
- Setup features: Includes a level, power indicators, DC power input, power switch and mounting hook for use according to the applicable instructions.
- US Version: This listing is for the North American offering. Vehicle application, frame fitment and software requirements must be checked for your setup.
Confirm your configuration before ordering. Email support@autel-us.com with your frame model, diagnostic tablet model, vehicle year, make, model and required calibration function. Photos of your mounting hardware and power adapter can help us review the equipment needed.
A Powered Accessory for Blind Spot Radar Calibration
The Autel CSC0605-01 Radar Calibration Box is part of a supported ADAS calibration setup. Autel's Standard Calibration Frame User Manual identifies it as AUTEL-CSC0605/01 and documents its use for Volkswagen blind spot detection system calibration.
The box works with the frame, diagnostic tablet, software and other equipment specified by the applicable procedure. It does not independently diagnose the vehicle or replace a complete calibration system.
Calibration box accessory only. The frame shown provides system context and is not included with this listing. The pictured items are not shown to scale.
See Its Role Within an ADAS Expansion Package
Autel's MA600 CAL 3 brochure illustration lists the CSC0605-01 in the Blind Spot Detection equipment group, alongside a separate MA600RAP mounting plate. It shows where this accessory fits within a broader configuration that also includes equipment for other calibration applications.
The capabilities of the complete illustrated package should not be attributed to the radar calibration box alone. Required accessories, mounting arrangements and vehicle coverage depend on the selected system and calibration procedure.
Application overview, not package contents. The MA600 frame, mounting plate and other accessories shown are separate items. Confirm the equipment required for your setup before ordering, and refer to What's Included for this listing's contents.
Confirm Mounting, Power and Software Before Ordering
The Standard Calibration Frame manual describes mounting the CSC0605/01 on the sliding plate of the frame crossbar. The illustration shows mounting and power connection details for that frame. It is a Standard Frame reference, rather than an MA600 installation guide.
Official specifications list 24 V, 1 A and 24 W. Verify the correct power adapter and connections for your equipment. Purchasing this accessory does not activate ADAS software or add vehicle coverage to a diagnostic tablet.
Follow the complete applicable instructions for mounting, leveling, positioning and operation. The numbered callouts are explained in the official manual available in the Downloads tab.
Check your existing setup before purchasing. Email support@autel-us.com with your frame model, tablet model, vehicle year, make, model and required calibration function. Include photos of your mounting hardware and power adapter if available.
Application & Compatibility
Select the CSC0605-01 according to the equipment specified for your vehicle's calibration procedure. Vehicle application, frame mounting, power supply and software requirements must each be checked.
| Configuration | Application Requirements |
|---|---|
| Vehicle & Calibration Function | Autel's Standard Calibration Frame User Manual documents the CSC0605/01 for Volkswagen blind spot detection system calibration. This is a documented application, not a complete vehicle coverage list. Confirm that the applicable procedure specifies this exact tool. |
| Autel Standard Calibration Frame | The manual describes attaching the radar calibration box to the sliding plate on the frame crossbar. Follow the applicable mounting, leveling and positioning instructions for the procedure. |
| MA600 Configuration | Autel's MA600 CAL 3 brochure illustration lists CSC0605-01 alongside a separate MA600RAP mounting plate in the Blind Spot Detection equipment group. Confirm the mounting plate and any additional hardware required for your MA600 setup before ordering. |
| Other Frame Configurations | Do not assume compatibility from the Autel brand name alone. Confirm the exact frame model, mounting arrangement and procedure-specific equipment requirements. |
| Power Equipment | Official specifications list 24 V, 1 A and 24 W. Verify the correct adapter and connector for this device; matching the voltage alone is not sufficient to establish power-supply compatibility. Confirm supplied power equipment separately. |
| Tablet & ADAS Software | Confirm that your diagnostic tablet and ADAS software support the intended vehicle and calibration function. Purchasing the CSC0605-01 does not activate ADAS software or add vehicle coverage. |
Check your configuration before purchasing. Email support@autel-us.com with your frame model, tablet model, vehicle year, make, model and required calibration function.
If available, include the tool number requested by the calibration procedure and photos of your mounting hardware and power adapter label. These details help us identify additional equipment requirements before you place an order.
CSC0605-01 Specifications
| Item | Specification |
|---|---|
| Product | Radar Calibration Box |
| Model | CSC0605-01 |
| Official Manual Reference | AUTEL-CSC0605/01 |
| Voltage | 24 V |
| Current | 1 A |
| Power | 24 W |
| Dimensions | 338 × 150 × 135 mm |
| Operating Temperature | −20°C to 50°C |
Source: Autel MaxiSYS ADAS Standard Calibration Frame User Manual, Section 2.8.4, Radar Calibration Box. Dimensions follow the order printed in the manual; length, width and height are not individually identified.
Confirm the correct power adapter and mounting equipment before ordering. Email support@autel-us.com with your existing equipment details. Electrical ratings do not establish vehicle coverage or confirm which accessories are included.
What's Included
| Item | Quantity |
|---|---|
| Autel CSC0605-01 Radar Calibration Box Identified in Autel's Standard Calibration Frame User Manual as AUTEL-CSC0605/01. | 1 |
Accessory listing: This product is the CSC0605-01 radar calibration box, rather than a complete ADAS calibration system. Application images may show a calibration frame, mounting plate, vehicle, tablet or other equipment to illustrate a complete setup.
Confirm additional equipment before ordering. Do not assume that power adapters, cables, mounting plates or storage cases shown in system documentation are supplied with this individual accessory. Email support@autel-us.com to confirm package contents and the equipment required for your existing setup.
Compare Autel ADAS Radar Calibration Accessories
A radar calibration box, reflector and calibration plate serve different procedures. Match the exact tool number specified for your vehicle and calibration function.
| Selection Guide | CSC0605-01 Radar Calibration Box | CSC0602-01 ACC Reflector | CSC0602-02 Radar Calibration Plate |
|---|---|---|---|
| Tool Type | Powered radar calibration box | Reflector | Radar calibration plate |
| Documented Application | Volkswagen blind spot detection system calibration, as described in Autel's Standard Calibration Frame User Manual. | Calibration frame positioning and radar calibration in procedures specifying this reflector. | Continental radar calibration in procedures specifying this plate. |
| Identifying Features | Power indicators, DC power input, power switch, level and mounting hook. | Reflector surface, laser pass-through hole, level, adjustment knob and mounting hook. | Plate surface, laser pass-through hole, level and mounting hook. |
| Electrical Requirements | 24 V, 1 A, 24 W | Passive reflector; no powered operation. | Passive calibration plate; no powered operation. |
| Manual Tool Reference | AUTEL-CSC0605/01 | AUTEL-CSC0602/01 | AUTEL-CSC0602/02 |
| Before Purchasing | Confirm the specified tool number, frame mounting, power equipment, tablet and software requirements. | Confirm that the procedure calls for CSC0602/01 and verify the frame and mounting arrangement. | Confirm that the procedure calls for CSC0602/02; it is a different tool from the CSC0602/01 reflector. |
These accessories are not interchangeable. Applications shown summarize the official Standard Calibration Frame manual and are not a complete vehicle coverage list.
Before ordering, email support@autel-us.com with your frame model, tablet model, vehicle year, make, model and required calibration function. Include the tool number shown in the applicable procedure if available.
Autel CSC0605-01 FAQs
Check the radar calibration box's application, mounting and power requirements before ordering. Contact our team with your existing equipment and required calibration function.
Q1 — What is the Autel CSC0605-01 Radar Calibration Box used for?
The Autel CSC0605-01 is a powered accessory used within supported ADAS calibration setups. Autel's Standard Calibration Frame User Manual documents it for Volkswagen blind spot detection system calibration.
It works with the frame, diagnostic tablet, software and other equipment specified by the applicable procedure. It is not a standalone diagnostic tool or a complete ADAS calibration system.
Q2 — Are CSC0605-01 and AUTEL-CSC0605/01 the same tool reference?
Yes. Autel's Standard Calibration Frame User Manual identifies the radar calibration box as AUTEL-CSC0605/01. This listing uses the hyphenated model number CSC0605-01.
Q3 — Will the CSC0605-01 work with my vehicle's blind spot system?
Autel's Standard Calibration Frame manual documents a Volkswagen blind spot detection application. This does not establish compatibility with every Volkswagen model or with other vehicle makes.
Please confirm the application with us before purchasing. Email support@autel-us.com with your vehicle year, make, model, required calibration function, frame model and tablet model. Include a screenshot of the tool number requested by your calibration procedure if available.
Q4 — Can I use the CSC0605-01 with an Autel Standard Calibration Frame?
Autel's Standard Calibration Frame User Manual describes attaching the CSC0605/01 radar calibration box to the sliding plate on the frame crossbar. Follow the applicable mounting, leveling and positioning instructions.
Confirm that your frame configuration has the required mounting equipment. Purchasing the box alone does not provide a complete calibration setup.
Q5 — Can I use the CSC0605-01 with an Autel MA600?
Autel's MA600 CAL 3 brochure illustration lists the CSC0605-01 alongside a separate MA600RAP mounting plate in the Blind Spot Detection equipment group.
Before purchasing, email support@autel-us.com with your MA600 configuration and photos of your existing mounting hardware. Confirm the mounting plate, additional equipment and vehicle-specific procedure requirements before ordering.
Q6 — What power supply does the CSC0605-01 require?
Autel's published specifications list 24 V, 1 A and 24 W for the CSC0605/01 radar calibration box.
Use the correct power equipment specified for the device. A matching voltage alone does not confirm adapter compatibility. If you already have an adapter, email support@autel-us.com with photos of its label and connector before using it. Confirm whether power equipment is supplied with your order separately.
Q7 — Does buying the radar calibration box include ADAS software?
No. This listing is for the hardware accessory. Purchasing the CSC0605-01 does not activate ADAS software or add vehicle coverage to your diagnostic tablet.
Please contact us before purchasing if you are unsure whether your tablet and software support the intended calibration. Email support@autel-us.com with your tablet model, frame model and vehicle details so we can help you check the configuration.
Q8 — Can the CSC0605-01 replace an ACC reflector or radar calibration plate?
No. The CSC0605-01 powered radar calibration box, CSC0602-01 ACC reflector and CSC0602-02 radar calibration plate serve different procedures.
Select the exact tool number specified by the applicable calibration instructions. The accessories are not interchangeable simply because they are used for radar calibration.
Q9 — Does this listing include the frame, mounting plate, power adapter and cables?
This listing is for one CSC0605-01 Radar Calibration Box, rather than a complete ADAS expansion package. A frame, tablet or other equipment shown in application illustrations should not be assumed to be included.
Check What's Included and email support@autel-us.com before ordering to confirm supplied mounting hardware, power equipment, cables and any storage case.
Q10 — Where can I find the CSC0605-01 instructions and specifications?
Open the Downloads tab and select the Autel MaxiSYS ADAS Standard Calibration Frame User Manual. Section 2.4.3 identifies the radar calibration box as AUTEL-CSC0605/01, and Section 2.8.4 provides its specifications.
For actual calibration, follow the applicable vehicle-specific instructions, equipment requirements and safety precautions.
